In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and techniques which you can use.
For those who have a dog that likes to bark, and especially if your dog loves to play in the backyard and other areas of the home, you need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup that will look a little scary at first, but it’s actually quite simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape out of the cardboard, so you will have to cut around the edge of the mask so you get something that resembles a cone. The main thing here is to be realistic with what type of paper plate which you’re using.
Then you will need to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can ensure that nothing will leak when you place the mask on. Make sure the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask , so you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.
Don’t worry too much about the paint getting stuck into your mask. It’s easy to remove it later, and it’ll leave you with a nice finished mask to show off to everyone! It’s also a good idea to wash away any excess paint once you’re done, so you don’t wind up with smudges or smears on your dog.
Then it is time to paste the mask on your dog’s dog gas mask head. First you need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you may start to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the base of the mask and fold it over. Be sure that it’s quite powerful and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged securely onto the surface of your dog. Do not make the folds too large or else it could look messy. Once you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask onto the dog. Be sure that the ears are flat and make sure that it’s not too short or long as this will cause some issues with the mask slipping off the dog’s face.
If you’re using a dog mask as your dog protection, you will have to do some sanding to make sure that it’s safe on your dog. You can accomplish it by sanding off any excess paper that may have been eliminated from your mask.